• Press-it Hole Puncher Kit
  • Press-it Hole Puncher Kit
  • Press-it Hole Puncher Kit
  • Press-it Hole Puncher Kit
  • Press-it Hole Puncher Kit
  • Press-it Hole Puncher Kit
  • Press-it Hole Puncher Kit
1 7

Projen Taiwan - Auto Tools, Hand Tools manufacturer

CAJ0091 TAIWAN CALIBRE Press-it Hole Puncher Kit

CAJ0091 TAIWAN CALIBRE Press-it Hole Puncher Kit

Material:
  • CR-V steel
Feature:
  • The Press-it hole puncher kit is designed for punching holes into bumpers to mount parking sensors.
  • The sizes of the holes are different from vehicle to vehicle.
  • Previously the holes were drilled by stepped drill bits. The problem is that the bumper is unusable if the hole is too deep.
  • Advantages of the kit: With the different cutters you can switch between hole sizes.
  • Thus the holes have the optimal diameter to set the parking sensors.
  • Another advantage of the Press-it System is that pressing in the holes is taken place after the painting.
  • The varnish is moved in at the edges and as a result there are no sharp edges.
  • Because the sensitivity of the sensors, they have to be fixed in millimeter precision to guarantee a proper function.
  • By using the mandrels, which are also included in the Press-It kit, the sensors are getting assembled in a very precise way.
  • The different mandrels depending on the size of the cutters.
  • Easy and professional punching of holes, according to the requirements of most automobile manufacturer
  • With the right cutter a custom-fit hole is punched into the bumper
CAJ0091 Suitable For:
  • Punch & Mandrel Ø18.2: Supplies usual models from: BMW, Volkswagen
  • Punch & Mandrel Ø24.0: Supplies usual models from: Opel
  • Punch & Mandrel Ø26.0: Supplies usual models from: Volkswagen
  • Punch & Mandrel Ø32.0: Supplies usual models from: BMW
CAJ0091-1 Suitable For:
  • 1 x hole punch/centring mandrel set, 2-piece, Ø18.2 mm for VW/Seat
  • 1 x hole punch/centring mandrel set, 2-piece, Ø18 mm BMW/Skoda
  • 1 x centring mandrel Ø17.8 mm for VW/Seat
  • 1 x hole punch/centring mandrel set, 2-piece, Ø18.4 mm for VW
  • 1 x hole punch/centring mandrel set, 2-piece, Ø24.0 mm for Opel/Vauxhall
  • 1 x hole punch/centring mandrel set, 2-piece, Ø26.0 mm for VW/Seat
  • 1 x hole punch/centring mandrel set, 2-piece, Ø26.7 mm for VW/Skoda
  • 1 x hole punch/centring mandrel set, 2-piece, Ø27.4 mm for Skoda
  • 1 x hole punch/centring mandrel set, 2-piece, Ø28.1 mm for Skoda
  • 1 x hole punch/centring mandrel set, 2-piece, Ø32.0 mm for BMW
  • 1 x hole punch Ø32.5 mm for BMW (without centring mandrel, as the PDC sensor is mounted at an angle)
  • 1 x hole punch Ø38.9 mm for VW (PSA) (without centring mandrel, as the parking steering assistant sensor is mounted at an angle)
  • 1 x hole punch drive, 3/8-inch with ball bearing
  • 1 x drill bit, Ø10 mm
Packaging:
  • 1Set/Blow Mould Case
  • CAJ0091: 10Set/15/16kgs/2'
    CAJ0091-1: 5Set/14/15kgs/1'
Ver todos los detalles

We are also good at