• Butane Soldering Iron
  • Butane Soldering Iron
  • Butane Soldering Iron
  • Butane Soldering Iron
  • Butane Soldering Iron
  • Butane Soldering Iron
  • Butane Soldering Iron
  • Butane Soldering Iron
1 8

Projen Taiwan - Auto Tools, Hand Tools manufacturer

CA534100 - TAIWAN CALIBRE Butane Soldering Iron - Black

CA534100 - TAIWAN CALIBRE Butane Soldering Iron - Black

Feature:
  • Clear window handle to see gas capacity
Instruction:
  • IGNITION:
    Make sure the exhaust rent is facing upward to avoid damage to the work surface.
    Press the safety lock button and simultaneously using your thumb pull down the trigger.
    This action will ignite the soldering iron.
    Hold the ignition button and release the safety lock button.
    Move the continuous flame switch to right for a constant flame.
  • EXTINGUISHING:
    Move the continuous flame Switch to left to cut off the gas supply and extinguish the flame.
  • FLAME ADJUSTMENT:
    Move the Adjustment switch toward "- " to increase the flame strength or"-" to decrease the flame strength.
    To set up the flame at the full "+ " may cause the torch to flare or extinguish.
    In this situation, please move the gas adjustment lever to "-" side to decrease the flame strength and set up a more efficient flame.
  • HOT BLOWER:
    WHEN COLD! - Remove the Soldering Tip by rotating counterclockwise.
    The assembly can now be used as Hot Blower without the Soldering Tip.
  • PENCIL TORCH:
    Disassemble the Soldering Assembly by rotating the Assembly Lock counterclockwise.
    Take off the Soldering Device and install the Metal Sleeve back to the unit.
    Operation will be the same as above for the Soldering Iron.
    Except do not use the Flame Off Button.
  • FUEL REFILLING:
    Turn off the Soldering lron and make sure the flame is off.
    Wait until the Soldering lron temperature cools down naturally before refilling gas.
    Hold the Soldering Iron in an upside down position.
    Insert and press down the butane canister nozzle into the Soldering Iron Refilling Valve.
    Stop refilling once gas starts to overflow.
  • NOTE:
    OVER FILLING WILL CAUSE THE FLAME TO SPIT.
    Please allow a few minutes for gas to become stabilise before operation.
Packaging:
  • 1pc/Sliding Card
  • 12/72pc/14/15kgs/4.5'
Ver todos los detalles

We are also good at